You’ll have to decide whether the pros outweigh the cons. For me personally, non-e of the cons outweighed the pros. The high price tag is an investment in my ability to preserve food for long periods of time for me and my family without relying on others. The noise doesn’t bother any of us and it’s like white noise.
Furthermore, the development of vacuum drying and the control of temperature rise have increased the efficiency of the freeze-drying systems which leads to reduced cycle times and lower costs. The development of the industry gives a lot of hope for the future of freeze drying in both the pharmaceutical and food industry.
Suitable placement of food around the freeze drying trays is much more than simply an aesthetic option—it’s a science. Making sure an excellent distribution, without the need of overpacking, is essential for reaching a dependable freeze drying end result.
When isolated, the pump seems to behave well. Short of putting a meter on the pump, my impression is that it is operating properly. I'm considering investing in a good meter to verify that it is reaching a good ultimate vacuum.
And once you have resolved your issue I hope you will stay around and talk to us all about what you have been drying in your machine, etc.
How does freeze drying work? To put it simply, it freezes the food then goes through a sublimation process where it dries the food.
Hopefully I said that in a way that makes sense! As well, does it matter which port is used as "in" and which as "out"?
The freeze dried food can be used for everyday eating, camping and of course, long term storage. I freeze dry as much as I can while times are good, I won’t plan to freeze dry if I go off-grid or don’t have electricity.
A more info bit of background on me - I used to work in a sold state fabrication lab (university research lab) and had a lot of hands-on work with ultra-high vacuum equipment. The pumping we do for freeze drying was what was required to just start
Furthermore, the modern freeze dryer systems have vacuum pumps and refrigerators which enhances the drying cycles and saves energy.
Posted January 21, 2016 (edited) On 12/1/2015 at 0:16 PM, Jenipher said: Tony, if you see this, I went ahead and purchased the catch can. Do you think it's okay to just purchase a reducer to go from the Freeze Dryer for sale Canada size of the exhaust to the size of the hose that came with the can? Hopefully I said that in a way that makes sense! As well, does it matter which port is used as "in" and which as "out"? Thanks so much, Jen Hi Jen, Sorry to be gone so long. I did exactly as you proposed. I purchased a brass reducer and pushed the blue hose over it.
If you have a high volume lab, it’s usually a good idea to have more than one to be safe. Freeze drying ice water hash is the #1 way to dry it because it increases your production speed, enhances its color, retains more delicate terpenes, and sharply limits microbial activity.
Back from our trip I turned the unit on and to my dismay found that the display was missing the middle two lines.
and this piece was placed on the vacuum hose fitting. I can still remove the panel without removing the hose to clean the coils. Simply remove the screws and slide the panel down the vacuum hose a few inches.